Tabla de contenido
Publicidad
ENCODING OF CD/PHONO INTO MP3 FILE
THE SYSTEM IS ABLE TO ENCODE NORMAL CD OR TURNTABLE TO MP3 FORMAT AND RECORDING AT
MEMORY MEDIA WITH USB CONNECTING PORT.
A) CD ENCODING
I) ECNODING 1 TRACK
1.
PERFORM NORMAL PLAYBACK OF THE CD TRACK YOU WANT TO ENCODE & RECORD,
2.
PRESS " REC " BUTTON (11) DURING THE PLAYBACK OF THE DESIRE TRACK, UNIT WILL DISPLAY "
" & "
" AND FLASHING. ENCODING IS PERFORMING NOW.
3.
AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
II) ENCODING 1 DISC
1.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CO DOOR
2.
PRESS THE " REC " BUTTON (11) AFTER FOCUS SEARCH COMPLETED. UNIT WILL DISPLAY "
"
" AND FLASHING. ENCODING IS PERFORMING NOW.
3.
AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
III) ENCODING BY PROGRAM
1.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CO DOOR
2.
SELECT THE DESIRE TRACKS BY FOLLOWING "
PRESS " CD PLAY/PAUSE/STOP " BUTTON (20) TO START PLAYBACK.
3.
DUYING CD PLAYBACK, PRESS AND HOLD THE THE
SECONDS TO ENTER THE STOP MODE.
4.
PRESS THE " REC " BUTTON (11) AND THE UNIT WILL DISPLAY "
IS PERFORMING NOW.
5.
AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE CD TRACK
-
THE SYSTEM WILL CREAT A " AUDIO " FOLDER AND THEN STORE THE ENCODING TRACK IN IT.
-
THE RECORDING FORMAT IS PRESET AT – MP3
-
NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
-
TO INTERRUPT THE RECRODING, PRESS THE " RECORD " BUTTON AGAIN DURING RECORD MODE
-
RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF TERMINATE THE ENCODING
PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO THE USB.
IV) COPYING OF MP3 FILE
IF PUTTING A MP3 DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB IF PRESS
THE " REC " BUTTON. THE OPERATION PROCEDURES IS SAME AS CD ENCODING AS STIPULATE ON ABOVE,
AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3 FILE BEING READ.
B) PHONO ENCODING
1.
SET THE FUNCTION BUTTON TO " PHONO " MODE AND THEN PRESS THE " REC " BUTTON DIRECTLY.
2.
THE LCD DISPLAY WITH SHOW THE WORD "
"
" AND FLASHING AFTER FEW SECONDS. NOW THE SYSTEM IS STARTING THE ENCODING MODE.
3.
START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB.
4.
AFTER FINISH OF RECODING, PRESS AND HOLD THE "REC " BUTTON (11) UNTIL THE LCD STOP FLASHING
AND RETURN TO " PHONO " MODE.
C) ENCODING BITRATE (BY REMOTE HANDSET)
YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING FROM CD OR PHONO TO USB, THE SELECTABLE
RANGE FROM 32 / 64 /96 /128 / 192 / 256 KBPS.
1.
SET IN "PHONO " FUNCTION (18) & REMAIN STOP MODE.
2.
PRESS THE " INFO " FUNCTION AND THE LCD DISPLA WILL SHOW THE DEFAULT BITRATE (128 KBPS)
3.
PRESS SKIP
OR
4.
PRESS AGAIN THE " INFO " TO CONFIRM THE SETTING AND THE LCD DISPLAY (4) RESUME TO " PHONO
" MODE
BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
USB
BUTTONS (21) TO SELECT THE DESIRED BITRATE FOR ENCODING.
GB-6
CD DISC PROGRAMMING " PROCEDURES. THEN
" CD PLAY/PAUSE/STOP " BUTTON (20) FOR 2
" & "
" AND THEN FLASHING, AND THEN DISPLAY "
" &
" & FLASHING. ENCODING
" &
Publicidad
Tabla de contenido
