Descargar Imprimir esta página

Parkside PBSPA 12 C3 Traduccion Del Manual De Instrucciones Originale página 265

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 115
General Safety Directions
Caution! When using
power tools, observe
the following basic
safety measures for the
prevention of electric
shocks and the risk of
injury and fire.
Please read all these
instructions before us-
ing this electric tool and
please keep the safety
instructions.
Careful handling and use of
battery devices
Charge the batteries only
in chargers that are rec-
ommended by the manu-
facturer. Risk of fire if a
charger that is suitable for a
specific type of battery is used
with other batteries.
In the power tools, use
only the batteries de-
signed for the purpose. The
use of other batteries may result
in injuries and risk of fire.
Keep the unused battery
away from paper clips,
coins, keys, nails, screws
and other small metal ob-
jects, which could cause
bridging of the contacts. A
short circuit between the battery
contacts may cause burns or
fire.
If used incorrectly, liquid
may leak from the bat-
tery. Avoid contact with
this. In the event of ac-
cidental contact, rinse off
with water. If the liquid gets
into eyes, seek medical assis-
tance. Leaking battery fluid may
cause skin irritations or burns.
Do not use damaged or
altered batteries. Damaged
or altered batteries can be un-
predictable and lead to fire,
explosion or risk of injury.
Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures over
130 °C can cause an explo-
sion.
Follow all instructions
for charging and never
charge the battery or the
battery-powered tool
outside the temperature
range stated in the oper-
ating instructions. Incorrect
charging or charging outside
the permitted temperature range
may destroy the battery and in-
crease the risk of fire.
Service
• never repair damaged
batteries. All battery repairs
should be carried out by the
manufacturer or authorised cus-
tomer service centres only.
Special safety directions for
battery-operated tools
Ensure that the device is
switched off before insert-
ing the battery. Inserting a
battery into a power tool that is
switched on may result in acci-
dents.
Recharge the batteries
GB MT
19

Publicidad

loading