Technical Specifications - Fulcrum RED PASSION Manual Del Usuario

1 - TECHNICAL SPECIFICATIONS

1.1 - WHEEL TECHNICAL SPECIFICATIONS
Rim measurement
Flange size Standard hubs
Standard hubs
Flange size BOOST hubs
BOOST hubs
Usage pressure
1.2 - SPOKES TECHNICAL SPECIFICATIONS
WARNING!
Only use genuine Fulcrum spokes for your specific type and model of wheel. Failure to use correct spokes can result in an accident, personal injury or
death.
To correctly assess wheel tension a tensiometer must be used: do not go by the tension you feel manually. It is therefore essential to have all the spoke
replacement operations carried out by a Fulcrum Store, a Fulcrum Service Centre or a mechanic specialised in assembly and maintenance on Fulcrum
wheels.
The spoke part numbers can be found in the spare parts catalogue which is downloadable from our website www.fulcrumwheels.com.
584 x 21 (27,5")
FRONT 100 mm
FRONT
REAR
FRONT 110 mm
FRONT
REAR
Rim 27,5": tyres MTB 2,0 inch: 2,75 Bar/40 Psi - tyres MTB 2,2 inch: 2,6 Bar/38 Psi
Rim 29": tyres MTB 2,0 inch: 2,27 Bar/33 Psi - tyres MTB 2,2 inch: 2,06 Bar/30 Psi
Rim 29": tyres GRAVEL 35 - 40 mm: max 5 Bar / 72 Psi
622 x 21 (29")
REAR 135 / 142 mm
QR standard - 15 mm thru-axle
QR standard - 12 mm thru-axle 135 mm/142 mm
REAR 148 mm
15 mm thru-axle
12 mm thru-axle 148 mm
3