Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10) Carefully check that the tyre beads are correctly
placed on the rim in a uniform manner along the entire
circumference of the wheel (Fig. 9 - 9.1).
11) Deflate the tyre by pressing on the top part of the
valve and prepare the tyre sealant liquid according to
the manufacturer's instructions.
h
h
h
h
h
h
h
h
h
h
h
h
NEVER use pierce-resistant sealers containing alkaline
substances (ammonia - sodium hydroxide).
9
9.1
12) Prop up the wheel, holding it in a vertical position
with the valve in the highest point (Fig.10).
13) If you are able to insert the liquid using a syringe:
remove the central part of the valve using a suitable tool,
insert the quantity of liquid suggested by the manufac-
turer and reinstall the central part of the valve (Fig.11).
10
11
7
Publicidad
Tabla de contenido
