Sauder Cannery Bridge Serie Manual Del Usuario página 13

Step 9
First, fi ll the holes in the LEFT REAR LEG (L) 1/4 to 1/2 full
å
with GLUE (54M). Then, insert a WOOD DOWEL (15F) into
the hole. Wipe away the excess GLUE.
Now, fi ll the hole in the short edge of the BACK SKIRT (N)
å
1/4 to 1/2 full with GLUE.
Fasten the BACK SKIRT (N) to the BOTTOM (E). Use two
å
BLACK 9/16" LARGE HEAD SCREWS (1S). Wipe away the
excess GLUE.
NOTE: You will tighten the HIDDEN CAMS in the BACK
å
SKIRT in step 14.
54M
L
15F
BLACK 9/16" LARGE HEAD SCREW
(2 used in this step)
www.sauder.com/services
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
E
N
1S
Fill the holes 1/4 to 1/2 full with GLUE.
419151 Page 13