Publicidad
Idiomas disponibles
Idiomas disponibles
▶ Use this appliance only for its intended use, as described in
this manual. Do not use accessories not recommended by the
manufacturer.
▶ This appliance should never be left unattended when plugged in.
▶ Close supervision is necessary when this appliance is used by, on or
near children or the disabled.
▶ Never use this appliance if it has a damaged cable or plug, if it does
not work properly.
▶ Keep the cable away from hot surfaces.
▶ Do not pull, twist or wind the cord around the appliance.
▶ Never drop or insert any object into any opening of this appliance.
▶ Before use, make sure the blades are well aligned.
▶ Do not place the appliance on any surface while it is operating.
▶ Do not use this appliance with a damaged or broken comb or with
missing teeth on the blades, as injury may result.
INSTRUCTIONS FOR HAIR CUTTING
Before starting the haircut:
▶ Inspect the machine, making sure it is free of oil between the teeth
of the cutting blade, and turn on the unit to distribute the oil and to
make sure it is running smoothly. Wipe off excess oil. This should
be done after each use. While using the unit, unscrew the rope from
time to time to avoid tangles.
▶ Seat the person so that their head is approximately at eye level.
This allows for ease of visibility during cutting and relaxed control
of the unit.
▶ Before cutting always comb the hair first so it is tangle free and
naturally used.
▶ Place a towel around the neck and shoulders of the person with the
haircut.
REMINDERS
▶ Cut the hair in a relaxed and slow way. Use short strokes only to
gradually work the entire head.
▶ Always cut little hair at a time, you can always trim additional hair
later
▶ As you work, frequently comb your hair back into the style you are
Manuel d'instructions
cutting into.
▶ When cutting with this hair clipper it is better to leave the hair dry,
not wet. With dry hair, it is much easier to control the amount of hair
that is cut
▶ Cutting hair takes practice so it is always better to leave hair longer
for the first few
CLEANING AND MAINTENANCE
▶ Make sure the appliance is switched off.
▶ Never immerse the device in water or other liquids.
▶ Do not use pointed objects for cleaning
▶ Do not use chemical or abrasive cleaning products.
▶ To remove the hairs from the cutting head, clean it with the cleaning
brush.
▶ Clean the manual clamping unit with a damp cloth.
▶ Clean the heads under running water
ref. 07591
ES
ES
PT
PT
EN
EN
FR
FR
Publicidad
