Descargar Imprimir esta página

GreenWorks Pro 2023402CT Manual Del Operador página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Possible cause
The machine does
not start.
The chain brake is
engaged.
The machine and
battery are not
connected correct-
ly.
The battery level
is low.
The lock out but-
ton and the trigger
are not pushed at
the same time.
The battery is too
hot or too cold.
The motor runs,
The machine is in
but the chain does
the protection
not cut correctly,
mode to protect
or the motor stops
the PCB.
after around 3 sec-
onds.
The battery is not
charged.
The chain is not
lubricated.
Incorrect battery
storage tempera-
ture
The machine has
Operating temper-
stopped working
ature of the ma-
to protect internal
chine is too high.
circuits.
English
13
Solution
Pull the chain
Voltage
brake in the direc-
tion of the user to
No load speed
disengage it.
Guide bar length
Make sure that the
Chain pitch
battery release
button clicks when
Chain gauge
you install the bat-
Drive links
tery pack.
Chain oil capacity
Charge the battery
pack.
Weight (without battery
pack)
1. Push the lock-
out button and
Chain
hold it.
Guide bar
2. Push the trig-
ger to start the
Battery model
machine.
Refer to battery
Charger model
and charger man-
ual.
Release the trigger
The recommended ambient temperature range:
and start the ma-
Item
chine again. Do
not force the ma-
Appliance storage tempera-
chine to cut.
ture range
Charge the battery.
Appliance operation temper-
Refer to the bat-
ature range
tery and charger
Battery charging temperature
manual for correct
range
charging proce-
dures.
Charger operation tempera-
ture range
Lubricate the
chain to decrease
Battery storage temperature
the friction. Do
range
not let the guide
bar and the chain
Battery discharging tempera-
operate without
ture range
sufficient oil.
14
Cool the battery
pack until it de-
creases to the am-
bient temperature.
Move the machine
to a cool, dry loca-
tion. Let rest for
5-10 minutes at
least. If the protec-
tion is frequent,
extend the cooling
Greenworks hereby warranties this product, to the original
time.
purchaser with proof of purchase, for a period of four (4)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
15
TECHNICAL DATA
60 V DC
20 m/s
14'' (356 mm)
3/8" LP (9.5 mm)
0.043" (1.09 mm)
52
230 ml
4.6 kg
90PX052X
144MLEA041
2906402CT and other BAC
series
CAC801 and other CAC
series
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
LIMITED WARRANTY
GARANTIE OUTIL &
BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS
EN

Publicidad

loading

Este manual también es adecuado para:

Csc404