Troubleshooting - Unold 48860 Instrucciones De Uso

Housing parts
29. Thoroughly clean all parts with
warm water and a mild washing-
up liquid, then dry all parts tho-
roughly.
Storage
30. Store all parts in a dry, dust-free
and clean location. Tip: Keep the
appliance packaging and store

TROUBLESHOOTING

Problem
Odour
The mixer does not
turn
The ice cream mix-
ture
does not reach
the desired consis-
tency
Solution
May occur with the first use of the appliance.
If the odour should continue to occur after the appli-
ance is used several times, contact the customer ser-
vice department.
Check whether the appliance is connected to a func-
tioning electrical outlet as specified on the rating pla-
te, and is switched on.
If the ice cream mixture has become too solid, the
mixer stops turning. Switch off the appliance. Re-
move the motor, lid and mixer and let the ice cream
thaw slightly. Remove it, e.g. with a plastic spatula.
The motor is overheated and has been switched off
automatically by the overheating protection circuit.
Unplug the power plug and allow the appliance to
cool. Remove the motor, lid and mixer and let the ice
cream thaw slightly. Remove it, e.g. with a plastic
spatula.
If none of the causes cited apply, contact our custo-
mer service department.
Check all recipe ingredients, mix them and ensure
that they are adequately pre-cooled.
If you are using alcohol, only add it to the ice cream
mixture when it has already reached the desired con-
sistency. If you add the alcohol too soon, it prevents
the ice cream mixture from solidifying.
the soft ice cream machine in
this box when the soft ice cream
machine is not in use.
31