Key Automation HALO HA12 Instrucciones Y Advertencias página 3

any normal non-automated opening device. To do
this, you must run the manual release (Fig.2).
Release and manual movement: before perform-
ing this operation pay attention that the device
can be released only when the door is stationary
(Fig.2).
• Take care when operating the manual release
since an open door may fall rapidly due to weak or
broken springs, or being out of balance;
• WARNING: the drive shall be disconnected from
its power source during cleaning, maintenance
and when replacing parts.
• Maintenance: Like any machine, your automa-
tion needs periodic maintenance to ensure its long
life and total safety. Agree with your installer on
a maintenance plan on a periodic basis; Key Au-
tomation recommends a frequency of 6 months
for normal domestic use, but this period may vary
depending on the intensity of use. All inspection,
maintenance or repairs should be performed only
by qualified personnel.
ATTENTION !
• Do not change the system and control or pro-
gramming parameters of the automation: the re-
sponsibility lies with your installer.
• The testing, routine maintenance and any repairs
must be documented by the person who performs
them, and related documents must kept by the
owner.
The only interventions that are possible for the
user and should be carried out periodically are the
cleaning of the slides and photocells, as well as the
removal of any leaves or rocks that could hinder
the automation. To prevent anyone from activating
the gate or door, before proceeding, remember to
release the automation and clean only with a cloth
slightly dampened with water.
• Disposal: At the end of the automation useful life,
make sure that the dismantling is carried out by
qualified personnel and the materials are recycled
or disposed of according to local regulations in
force.
• Operate the gate or door (with remote control,
key switch, etc..); if everything is working proper-
ly, the gate or the door will open and close nor-
mally, otherwise the flashing light flashes and the
maneuver does not start.
With the safeties out of use, the automation must
be repaired as soon as possible.
Replacing the remote control battery: if your re-
mote control seems to work worse or not work at
all after a while, this may simply depend on the ex-
haustion of the battery (depending on use, it may
take several months to over a year). In that case,
you will see that the confirmation of transmission
light does not turn on, or comes on only briefly.
The batteries contain polluting substances: do not
throw them in the garbage but use the methods
prescribed by local regulations.
The A-weighted emission sound pressure level of
the drive is LpA ≤ 70dB(A).
Thank you for choosing key Automation; for more
information feel free to visit our website www.
keyautomation.it.
ATTENTION !
A more recent version of the manual supplied
may be available for download at www.keyau-
tomation.it; check for updates.
TIP
This automation system could be compatible with
the IoT KUBE system by Key Automation, which
allows you to send automation controls from your
smartphone and grant access, even partial and
according to time slots, to other smartphones. The
system includes a specific free KUBE app, availa-
ble for iOS and Android platforms.
The solution developed by Key Automation does
not connect to your home router, which therefore,
will not be exposed to any potential risks. Connec-
tion is established directly from your smartphone
and is only active when you use the app.
The system also allows your installer to access
your system remotely, to check its operation or
to fix any problems. Any change that the install-
er may introduce will require your prior consent
through the app.
The use of this technology will ensure the best
possible service, ensuring longer system durability
and quick assistance.
More information from our partner installers or our
authorised service centres.
EN