mundoclima MUCR-H11 Serie Manual De Instalación Y Usuario página 66

How to adjust the air inlet direction? (From rear side to under-side)
1. Take o the ventilation panel and ange.
Ventilation panel
3. When installing the lter mesh, t it into the
ange as illustrated in the following gure.
How do I adjust the static pressure of the fan?
OPTION 1:
Manually using the "SP" function of the KJR-120G2 wired remote control.
Please, follow the steps:
- While the device is stopped, press the "COPY" button for 3 seconds.
Copy/
Follow me
- Press the "+" or " - " button until "SP" is selected.
- +
- Press the "CONFIRM" button.
Confirm
- Press the "CONFIRM" button to select the desired static pressure setting (SP1 to SP4)
Confirm
- Press the "ONOFF" button to save the setting.
Note: To exit the setting press the "BACK" or "ON / OFF" button. It you do not press any key and wait 15 seconds it will also exit.
Air return ange
All the figures in this manual are for explanation purpose only. They may be slightly different from the air
conditioner you purchased.The actual unit shall prevail.
2. Change the mounting positions of the
ventilation panel and air return ange.
Air return ange
NOTE
66
Ventilation panel