Makita DCL180 Manual De Instrucciones página 10

► 1 . Handle 2. Capsule
NOTE:
• Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
• Always be sure to check that both filter and pre-
filter are loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.
If the following examples occur, filter and prefil-
ter are not loaded correctly. Reload them cor-
rectly to rectify problem.
Problem Examples
Example 1: Only prefilter has been loaded (no filter)
► 1 . Prefilter
Example 2: Only filter has been loaded (no prefilter)
1
► 1 . Filter
Example 3: Filter has been loaded in a peeled back
1
state
2
► 1 . Filter
Example 4: Prefilter's securing lip is not firmly locked
into groove of cleaner housing
► 1 . Groove of cleaner housing 2. Prefilter 3. Securing
Reassembly for high performance
filter
Connect high performance filter. At this time, make sure
to twist high performance filter so that securing lip is
firmly locked into cleaner unit.
1
► 1 . High performance filter 2. Securing lip
10 ENGLISH
1
2
lip
1
3
1
2