Dreame R10 Manual Del Usuario página 11

Installation
EN
Wall Mount Installation Diagram
1. Paste the mounting template sticker on the wall. The bottom edge of the mounting template
sticker should be parallel to and about 107 cm from the ground.
2. Use a power drill with an 8 mm drill bit to drill a hole into each marker on the mounting
template sticker, then insert a wall plug into each hole.
3. Align the holes on the mount with the holes on the wall. Fasten it to the wall with the
included screws.
Note:
• The wall mount is an optional accessory. You can install it based on your needs.
• The wall mount should be installed on a cool, dry surface with an electrical outlet nearby.
Prior to installing, ensure that there are no electrical wires or pipes in the space directly
behind installment position.
6
107 cm