Dreame R10 Manual Del Usuario página 17

Care & Maintenance
EN
3. Remove the pre-filter first, then lift the handle of the cyclone assembly and turn it
counterclockwise until it stops, then pull to lift out the cyclone assembly.
4. Wipe the dust cup with a soft wet cloth. Pay attention to wringing out the cloth before
using.
5. Rinse the cyclone assembly and pre-filter until they are clean. After washing, air dry for
at least 24 hours .
Note:
• It is recommended to clean the dust cup once every month.
• It is recommended to clean the pre-filter at least once every 3 months and the cyclone
system at least once every 6 months.
12
1
Cyclone Assembly
2
3
To avoid the risk of
electric shock, do
not rinse the dust
cup with water.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
Pre-Filter