Dreame R10 Manual Del Usuario página 21

Care & Maintenance
EN
Cleaning the Multi-Surface Brush
1. Turn the lock counterclockwise until it
stops, then remove the roller from the roller
brush.
3. When it is dirty, rinse the brush roller
with clean water until it is clean.
16
2. Use scissors to cut off the hairs and
fibers that get stuck on the brush roller.
Wipe the dust from the notch and
transparent cover with a dry cloth or paper
towel. Thoroughly dry before use.
4. Stand the brush roller upright for at least
24 hours until it is fully dry.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6