Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Instructions (continued)
5
Assembling the rear grill and blade
□
Remove the four nuts, spring washers and flat washers from
the bolts around the motor shaft.
□
Carefully slide the rear grill (F) over the bolts.
□
Secure with the flat washers, spring washers and nuts
removed in Step 1.
□
Carefully slide the blade assembly (E) over the shaft and align
the inner hex head driver provided with the slot on the shaft
of the motor (A).
□
Tighten the blade assembly (E) with the screws using a
square fixed socket wrench (not provided).
6
Assembling the front grill
□
Hang the front grill (D) on the top rib of the rear grill (F) by utilizing
the hook.
□
Snap the front grill into the rear grill to secure.
spring
washer
nut
at
washer
E
D
6
A
F
F
A
F
Publicidad
