Tip: When processing food such as carrots,
plastic parts may become discoloured. Re-
move discolouration with a soft cloth and a
few drops of cooking oil.
Application examples
Observe the comments and figures in the
table.
→ Fig.
24
Troubleshooting
Processed food does not fall into the
bowl.
Outlet opening or housing is blocked.
Finish processing and unplug from the
1.
mains.
Application examples en
Remove the accessory.
2.
Take the accessory apart and remove
3.
the blockage.
Cutting disc does not rotate although the
main unit is running.
Lid is not fitted and engaged properly.
Check whether the lid is fitted properly.
▶
Accessory has been overloaded and the
disc holder shaft has broken at the
predetermined breaking point.
You can order a new disc holder from
▶
customer service under order number
10000314.
13