Manual Operation; Manual Operation Selection; Setting The Manual Temperature - Orbis Thermo X Manual De Uso

Manual operation is enforced when one wishes to temporarily discontinue
Automatic operation and set a different temperature.
Then the temperature will not be governed by the program schedule, but by the
manually selected temperature: In this case Thermo X will behave as an ordinary
thermostat.
This status is indicated by the symbol

MANUAL OPERATION SELECTION

1) Press : the reading
will appear, in which the temperature to be set fl ashes (time, day and temperature
may differ from the example)
2) Press or to set the desired temperature
3) Press to confi rm or wait for 45 seconds; the display will then read the time, the
temperature measured and the icon

SETTING THE MANUAL TEMPERATURE

1) Press or : the reading "SET" will appear up on the right and the temperature
previously set in manual mode will fl ash
2) Press or to set the desired temperature
3) Press to confi rm or else wait for 45 seconds: the display will read the
temperature measured again
To exit the manual operation mode
Press for 3 seconds: the device will resume automatic operation mode and the
icon will disappear

MANUAL OPERATION

on the display.
; the reading "SET" will disappear
- 78 -
User Manual - Thermo X