Electromagnetic Compatibility - Orbis Thermo X Manual De Uso

Input for telephone dialer (OUT BUS)
The Thermo X can be remote-switched on and off through a phone dialer.
It is possible to connect a landline dialer (X.CODE WAVE code VN782900) or
GSM dialer (X.CODE BUS code VE072500) or other dialer with a clean output
contact, between the OUT BUS terminals.
When connecting up a X.CODE BUS code VE072500 that uses the RS485 output, it is
necessary to observe the correct connection polarity.
HARMONISED REFERENCE STANDARDS
Conformity with EU Directives:
2006/95/EEC amended by 93/68/EEC (Low Voltage Electrical Equipment)
89/336/EEC amended by 92/31/EEC and 93/68/EEC (EMC)
is declared with reference to the following harmonized standards:
Safety:
EN 60730-2-7: "Automatic electrical controls for household and similar use.
Part 2: Particular requirements for timers and time switches"
EN 60730-2-9: "Automatic electrical controls for household and similar use.
Part 2: Particular requirements for temperature sensing controls"

Electromagnetic compatibility:

EN 61000-6-1: "Electromagnetic compatibility (EMC) - Part 6-1: Generic standards -
Immunity for residential, commercial and light-industrial environments"
EN 61000-6-3: "Electromagnetic compatibility (EMC). Part 6-3: Generic standards -
Emission standard for residential, commercial and light-industrial
environments"
- 93 -
User Manual - Thermo X