Hoshizaki HRE-70A Manual De Instalación página 4

Trayslide
Fig. 5
The Trayslide Supports are also removable. To
remove the Support, (1) slightly slide up to unhook,
and (2) pull off in the indicated direction. To refit
the Support, reverse the removal procedure.
Trayslide Support
Fig. 6
The Shelves can be replaced by full or double size
Gastronorm-Bleche hotel pans.
CAUTION
Hotel pans must be free from sharp edges or
burrs. Otherwise the Trayslides may be shaved,
and their particles can mix with foods.
4. ELECTRICAL CONNECTIONS
* This refrigerator/freezer must be plugged into the
separated power receptacle which is readily
accessible and has enough capacity. The maximum
allowable voltage variation should not exceed ± 10
percent of the nameplate rating. See the Nameplate.
* If the supply cord and the plug should need to be
replaced, it should only be done by a qualified
service engineer to avoid any danger.
5. FINAL CHECK LIST
1) Is the refrigerator/freezer in a site where the ambient
temperature is within 5°C to 43°C all year around?
2) Have all shipping carton, packing, tape(s) and
protective plastic film on the exterior been removed
from the refrigerator/freezer?
3) Have all electrical connections been made?
4) Has the power supply voltage been tested or
checked against the nameplate rating?
5) Has the user been given the Instruction Manual and
instructed on how to operate the refrigerator/freezer
and the importance of periodic maintenance
recommended?
6) Has the user been given the name and telephone
number of the Authorized Service Agency?
3
ENGLISH