Publicidad
Bluetooth one touch connection via
NFC (continued)
■ NFC connection for audio playback
Check that:
● Your device (smartphone / tablet) has an NFC function.
● NFC function on your device is turned on.
● Screen lock function of the device is off.
● This unit is not in Eco mode.
1
Touch your device to N-Mark on the remote control or
main unit.
2
A pop-up window asking whether to proceed with the
Bluetooth connection appears on the device. Select
<YES>.
● The 'connected' message appears when the connec-
tion is complete.
3
Playback will start automatically. Otherwise, press play
(on remote control or source device).
● Sound will be heard from the speakers of this unit via
audio streaming.
● Your device must be within 10 meters from the unit.
Bluetooth operation buttons
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
Notes:
● To disconnect the Bluetooth connection, simply touch your
device to any of the N-Marks again.
● This product switches to Bluetooth function automatically
when NFC tagging is done by your device.
● If your device does not support NFC, or if you wish to listen
to audio via Bluetooth connectivity without NFC; refer "Pair-
ing with other Bluetooth source devices" on pages 7 - 8.
● Some Bluetooth devices will connect to this unit automati-
cally when the device or its Bluetooth mode was turned on.
In such case, it will also change the function selection of
this product. If you do not want it to connect automatically,
please disable Bluetooth on your device.
● It takes about a few seconds for a Bluetooth enabled device
(eg. smartphone) to establish Bluetooth connection with this
unit via NFC or manual connection.
● If "Empty tag" or similar message appears on your device,
touch the device again to the NFC detection area on the
main unit.
Listening to Bluetooth enabled devices
■ Bluetooth
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 10 meters (30
feet) without the hassle of having to use cables to connect
these devices.
This unit supports the following:
Communication System: Bluetooth Specification version
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Top view of main unit
Listening to Bluetooth enabled devi-
ces (continued)
Notes when using unit with a mobile phone
This unit cannot be used to talk over the telephone even when
●
there is a Bluetooth connection made to a mobile phone.
Please refer to the operating manual supplied with the mobile
●
phone for details on operation of your mobile phone while
transmitting the sound using a Bluetooth connection.
■ Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they
can exchange data. This unit can memorise up to a maximum
of 99 devices. Once paired, it is not necessary to pair them
again unless:
pairing is made with more than 99 devices. Pairing can
●
only be made one device at a time. If subsequent de-
vice is paired, the oldest device paired will be deleted
and replaced with the new one.
this unit is reset. All pairing information is deleted when
●
unit is reset.
pairing information is deleted while re-pairing, etc.
●
Indicators:
Indicator
Condition
Lights up
No indication
However, the indication status is not displayed during
Bluetooth standby mode.
■ Pairing with other Bluetooth source devices
1
Press the ON/STANDBY button to turn the power on.
2
Press the FUNCTION button (main unit) repeatedly or Blu-
etooth button (remote control) to select Bluetooth function.
"BLUETOOTH" appears on the display.
3
Perform pairing procedure on the source device to dete-
ct this unit. "LS703B SHARP" will appear in the detected
devices list (if available) in the source device. (Refer the
source device operating manual for details).
Notes:
Place the devices to be paired within 1 meter of each
●
other when pairing.
Some source devices are unable to display lists of de-
●
tected devices. To pair this unit with the source device,
refer to the source device operating manual for details.
4
Select "LS703B SHARP" from the source list. If Pas-
scode* is required, enter "0000".
Passcode may be called PIN Code, Passkey, PIN
*
number or Password.
E-7
MICRO COMPONENT SYSTEM XL-LS703B
Bluetooth status
Connected
Unconnected
Publicidad
