Listening on Android™ devices (continued)
■ To disconnect the Android device
1
Quit the application (apps).
2
Disconnect the device from the USB terminal.
■ Various functions
Function Remote control
Track
up/down
Fast
forward/
reverse
Notes:
If non-compatible device is detected, "Dev No Support"
●
will be displayed.
Controls (play / pause / skip up / skip down / fast forward
●
/ fast reverse) will function based on actual Applications
(Apps) controls used on Android devices.
Stop
button is invalid during Android device playback.
●
Android is a trademark of Google Inc.
Listening to a CD or MP3/WMA disc
■ Disc playback
1
Press the ON/STANDBY button to turn the power on.
2
Press the FUNCTION button repeatedly on the main unit to
select CD function.
3
Press the
OPEN/CLOSE button to open the disc compart-
ment.
4
Place the disc on the disc compartment, label side up.
5
Press the
OPEN/CLOSE button to close the disc tray.
6
Press the / (CD / ) button to start playback.
To stop playback:
Press the
button.
Operation
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
MICRO COMPONENT SYSTEM XL-LS703B
Listening to a CD or MP3/WMA disc (continued)
Caution:
● Do not place two discs in one-disc-tray.
● Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
● Do not push the disc tray while it is moving.
● If the power fails wait until the power is restored.
● If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
● Be sure to place 8 cm disc in the middle of the disc tray.
● Due to the structure of the disc information, it takes longer
to read an MP3/WMA disc than a normal CD (approximately
20 to 90 seconds).
Note for CD or MP3/WMA disc:
● Rewritable multi-session discs with unfinished writing,
can still be played.
■ To resume playback after stopping (resu-
me play) (MP3/WMA only)
You can resume playback from the track playback is stopped.
1
While a disc is playing, press the
2
To resume play, press the CD / button. Playback resumes
from the track you stopped.
To cancel the resume playback:
Press the
button twice.
■ Various disc functions
Function
Main
unit
Play
Pause
Stop
Track
up/down
Fast
forward/
reverse
■ Random play
To random play all tracks:
Press P.MODE button on the remote control repeatedly until "Ran-
dom" appears. Press the / (CD / ) button.
To cancel random play:
Press the P.MODE button again. "RDM" indicator will disappear.
Notes:
● If you press the
you can move to the track selected next by the random
operation. However, the
you to move to the previous track. The beginning of the
track being played will be located.
● In random play, the unit will select and play tracks auto-
matically. (You cannot select the order of the tracks.)
● In folder mode on, only tracks in selected folder will be
played randomly.
E-9
button once.
Remote
Operation
control
Press in the stop mode.
Press in the playback
mode. Press the /
button to resume play-
back from the paused
point.
Press in the playback
mode.
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start
the desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
button during random play,
button does not allow