Hitachi Solutions StarBoard FX-63G Guia Del Usuario página 2

FX-DUO Series/FX-TRIO Series/FX-TRIO-77S/FX-TRIO-63E/77E/FX-E90W
Page
1-6 1.3.2 Function Area
(FX-DUO The function area is provided with shortcut keys for the functions that are frequently used
Series) in the StarBoard Software. Use by clicking the middle of the symbol with your pen or
finger. With the exception of touch mode/pen mode selection and one-time right click, you
1-6 can customize the shortcuts with the software for Windows. You cannot customize the
(FX-TRIO shortcuts with the software for Mac. Refer to the online help for details. The default
Series/77S) settings are as follows.
1-5
(FX-TRIO
-63E/77E)
1-5
(FX-E90W)
2-6 2.2.3 Basic Operations of the Electronic Pen
(FX-DUO
Series)
2.2.4 Customizing the Electronic Pen
2-6
(FX-TRIO
Series/77S)
2-6
(FX-TRIO
-63E/77E)
2-6
(FX-E90W)
2.3.1 Start Method (Windows)
(5) Select "Start" → "All Programs" → "StarBoard Software," or double-click the
StarBoard icon on the desktop.
2-7～2-9
(FX-DUO
Series)
2-7～2-9
(FX-TRIO
Series/77S)
If the "No connection" icon in below appears on the Tasktray, it means that the
2-7～2-9
StarBoard is not connected. Make sure that the StarBoard and the PC are properly
(FX-TRIO
connected.
-63E/77E)
2-7～2-9
(FX-E90W)
(6) Run "LsCanWiz.exe" located under "My Computer" → "C Drive" → "Program
Files" →"Hitachi Software Engineering" → "FX-DUODriver", and adjust the sensor
according to the instructions on pages 3-5.
(*)This folder path may be changed since it depends on your Windows installation.
If the positions of the pen tip and cursor are out of alignment, select "MENU" on the
StarBoard Software toolbar → "Settings" → "StarBoard"→ "Calibrate," and then
perform position alignment.
Windows contents
Connected No Connection
All Rights Reserved, Copyright © 2010,2014, Hitachi Solutions ,Ltd.
1.3.2 Function Area
The function area is provided with shortcut keys for the functions that are frequently used in
the StarBoard Software. Use by clicking the middle of the symbol with your pen or finger.
With the exception of touch mode/pen mode selection and one-time right click, you can
customize the shortcuts with the software for Linux. Refer to the online help for details. The
default settings are as follows.
Same as Windows.
Same as Windows.
2.3.1 Start Method (Linux)
(5) Start the StarBoard Software.
[1] Debian
Select [Applications] → [Education] → [StarBoard].
If the "No connection" icon in below appears on the Tasktray, it means that the
StarBoard is not connected. Make sure that the StarBoard and the PC are properly
connected.
Connected
(6) Start the LsCamWiz.
[1] Debian
Select [Applications] → [Education] → [LsCamWiz].
Adjust the sensor according to the instructions on 3.2.2.
If the positions of the pen tip and cursor are out of alignment, select "MENU" on the
StarBoard Software toolbar → "Settings" → "StarBoard"→ "Calibrate," and then
perform position alignment.
2/33
Nov. 2014
Linux contents
No Connection
English