Oil Change - GENERGY CIDACOS II Instrucciones De Uso

9.1 Oil change.

1 Keep the engine running during 5 to 10 minutes for the oil to reach some
temperature and reduce its viscosity (more liquid). This way it will be easier to
extract it completely.
2 Place an appropriate container under the oil draining hole to collect the used oil.
3 Unscrew the oil draining screw by turning counter clockwise; keep the screw and
its joint.
4 Release the oil filling plug so the engine can intake air and achieve faster draining.
5 Once all of the oil has been extracted, place the draining screw again with its joint
and clean oil spillage, if any.
6 Fill in with the recommended oil as instructed on chapter 5.1 in this manual.
IMPORTANT: In order to comply with environmental requirements, the used oil
must be placed in a sealed container and taken to the service station for recycling.
Do not discard it on the trash and do not spill on the floor.
OIL FILLING PLUG
OIL DRAINING HOLE
44