SICK Smart Light Tower SLT060-0B010J700 Instrucciones De Operación página 32

OPERATING INSTRUCTIONS
en
6.5 Mounting on a rod
6.6 Mounting the Smart Light Buzzer SLB
32 O P E R A T I N G I N S T R U C T I O N S | SLT
Mounting surface
1
Ø 31 mm
2
M30 Nut
3
Screw a rod with ½-inch NPT onto the female thread of the signal lamp. The recom‐
mended tightening torque is 2.25 Nm.
1
NOTE
The SLB (SLB060-0B010K700) is available as an optional accessory (part number
6076072).
1
2
3
8026183.1FJ5/2022-11-17 | SICK
Subject to change without notice