Publicidad
Idiomas disponibles
Idiomas disponibles
4.4 Adjusting the Legs
If the product is not in balanced position,
adjust the front adjustable legs by rotating
them to right or left.
4.6 Hot Surface Warning
The side walls of your product are equipped
with cooler pipes to enhance the cooling
system. High pressure fluid may flow
4.5 Installation of the Cooler and
When the freezer and cooler products are
installed side by side, the installation
should be performed so that the freezer
product (1) will be on the left and the cooler
product (2) will be on the right. To prevent
sweating problems that might occur
between products, anti-condensation ele-
ments are located on the left side of the
cooler product.
Freezer ( 1 )
Cooler ( 2 )
through these surfaces, and cause hot sur-
faces on the side walls. This is normal and
it does not require servicing. Be careful
when you contact these areas.
EN / 15
Freezer Products Side-by-side
EN
ES
RO
Publicidad
