Publicidad
Idiomas disponibles
Idiomas disponibles
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Turning off a hotplate automatically
The hotplate turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on.
Select the hotplate and desired power level using the Tipp
1.
control.
Press the
3
symbol. The
2.
up.
‹‹
is displayed on the time program function display.
Select the desired cooking time using the Tipp control.
3.
After a few seconds, the cooking time begins to count down.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
select the hotplate using the Tipp control. Press the
and change the cooking time using the Tipp control, or set
to
.
‹‹
Keep warm function
This function is used for melting chocolate or butter and for
keeping food warm.
To activate
Select the required hotplate using the Tipp control.
1.
Within the next 5 seconds, press the
2.
The
indicator lights up.
–
The "keep warm" function has been turned on.
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Remove the Tipp control. A signal sounds and the
lights up. The control panel is locked for 35 seconds. The
x
indicator on the hotplate lights
3
–
symbol.
indicator
"
Once the time has elapsed
The plate is turned off. The warning signal sounds, the hotplate
displays
and the time program function screen displays
‹
for one minute. The
‹‹
Pressing any symbol turns off the indicators and stops the
beep.
Notes
If cooking times have been programmed for various plates,
■
the time program function displays the shortest cooking time.
The
x
indicator of the hotplate lights up.
To check the remaining cooking time of a hotplate: select the
■
hotplate using the Tipp control. The cooking time will be
displayed for five seconds.
Cooking time can be programmed for up to 99 minutes.
■
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
No hotplate should be selected.
Press on the
1.
display shows
Select the required time using the Tipp control.
2.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
symbol and change the time using the Tipp
3
control, or set to
Once the time has elapsed
A warning beep sounds. The time program function displays
and the indicator
‹‹
off the indicators and stops the beeping.
symbol
To turn off
Select the required hotplate using the Tipp control.
1.
Press the
–
2.
The
display turns off.
–
After five seconds, the hotplate turns off and the residual heat
indicator appears.
surface of the control panel can now be cleaned without risk of
changing the settings.
Note: The lock does not affect the main switch. The hob may
be turned off when desired.
indicator of the hotplate flashes.
x
3
symbol, and the time program function
‹‹
.
.
‹‹
comes on. Pressing any symbol turns
V
symbol.
27
Publicidad
