Publicidad
Idiomas disponibles
Idiomas disponibles
en
•
Only carry out modifications to the product following consultation
with the manufacturer.
•
Only use original spare parts and accessories authorised by the
manufacturer.
The use of other parts will absolve the manufacturer of liability for
any consequences arising therefrom.
2.7
Improper use
The operational reliability of the supplied product is only guaranteed
if used as intended and in accordance with section 4 of the installa-
tion and operating instructions. The limit values must on no account
fall under or exceed those values specified in the catalogue/data
sheet.
3
Transport and storage
3.1
Scope of delivery
•
Wilo-Connect module BMS
•
Installation and operating instructions
3.2
Transport inspection
Check delivery immediately for damage and completeness. Where necessary make a complaint immediately.
CAUTION
Damage due to incorrect handling during transport and storage!
Protect the product from moisture, frost and mechanical damage during transport and tem-
porary storage.
Protect the product against temperatures outside the range of -30 °C to +70 °C.
Only store in original packaging.
4
Intended use
•
The Wilo-Connect module BMS is designed for external control and operating status signalling of Wilo
pumps.
•
The Wilo-Connect module BMS is not designed for safety-related deactivation of the pump.
32
Installation and operating instructions • Wilo-Connect module BMS • Ed.02/2023-10
Publicidad
