AYR int_LOCK RF 2 Manual Del Usuario página 36

4.3 Elimination of all controls.
1- Remove the cover and remove the battery from the lock.
Press the central button several times until the LEDs stop li-
ghting up.
2- Insert the pairing tool into the pairing hole until you feel a
slight "Click" and press and hold the inner push button. Do
not release it during the rest of the process.
3- Without removing the pairing tool, insert the battery. A long
beep with flashing red LED will sound.
4- Remove the pairing tool and put the cover on.
5- All lock controls have now been removed.
4.4 Using one control to operate two or more locks
To use two locks from the same remote control, associate the
remote control with the first lock and then repeat the same
process with the second lock. If you are going to use two loc-
ks on the same door, we recommend that you configure all
the controls in the first lock and then configure the controls in
the second lock.
36
EN