AYR int_LOCK RF 2 Manual Del Usuario página 37

NOTE: do not synchronise the remotes in both locks at the
same time, as an error may occur during the process of
pairing the devices.
5. OPENING AND CLOSING
5.1 From the lock
Press the central button to open and close. It will illuminate and
a confirmation beep will sound.
5.2 From the RF control
Press the lower button to open the lock and the upper button to
close it.
6. OPTION SETTINGS
6.1 Alarm
The lock has a vibration sensor that activates a buzzer when
knocks and vibrations are detected on the door, this will alert
intruders in a dissuasive way. If you activate the alarm from the
lock with the main push button or from the remote control, the
alarm is deactivated every time you open the door.
It can be activated from:
• LOCK: Press and hold the actuation button for three seconds
during the closing process (long press).
• REMOTE CONTROL: Press and hold the lock button on the
control unit for three seconds.
37
EN