ARDES ARFRYA07 Folleto De Instrucciones página 11

Food contact
Only these parts are intended for contact with food, under the conditions indicated:
PARTS INTENDED FOR
CONTACT WITH FOOD
CONTAINER (1)
BASKET (2)
- These parts can only be used with this appliance. Do not use the parts separately for other applications.
- Before using the appliance for the first time wash the parts intended for contact with food as indicated
in the Maintenance section.
INSTRUCTIONS FOR FIRST USE
Before using the device for the first time, operate it while empty for 10 mimutes at the maximum
temperature in a well-ventilated area to eliminate any odours and fumes due to possible residual traces
from production on the internal parts of the device.
Remove the plug from the power outlet and let the device cool down.
Before using the appliance for the first time, clean it as indicated in the "MAINTENANCE" paragraph.
- Remove the container (1) from the fryer and insert the ingredients in the basket (2). See the "settings" paragraph
for information on preparation of ingredients.
Avoid food coming in contact with the heating element. Do not fill the basket beyond the MAX level and pay
particular attention to food that can leaven. Never use the container without the basket.
Attention: never pour oil or other liquids in the container or in the basket; use of oil is only permitted
as indicated in the "settings" paragraph.
- Insert the container in the appliance.
- Insert the plug in the power socket.
- Press the ON-OFF (5) button under the display
The display switches on and the temperature and default time are displayed in rapid succession.
- Use key M (6) to set the cooking program based on the food to cook or the manual program.
The relative light lights up cyclically and the temperature and cooking time will be automatically set.
For manual functioning (all the lights referring to the food are off), the fryer will work based on the temperature
and time data manually set.
- You can vary the temperature settings by 5°C at a time and the cooking time using the relevant + and - keys (7).
The "settings" paragraph outlines some useful information to cook various food.
If the appliance is not hot already, set approx. 3 minutes more or pre-heat the appliance for 3
minutes before inserting the ingredients.
- Press the ON-OFF button again.
The appliance starts to work and the ventilation (8) and heating (9) lights switch on.
The display also shows the temperature set and the remaining cooking time.
During cooking, the heating element (and the relevant light) switch on and switch off to reach the temperature
set or to maintain it.
Some food must be stirred half way through cooking (see the "settings" paragraph). In this case,
remove the container from the appliance paying attention you only touch the handle and do not separate the
basket from the container (do NOT press the release button Figure A); the appliance switches off in an instant
if the container is removed; shake the container and place back in the appliance; the fryer re-activates as
soon as the container is put back in and the cooking cycle starts again from the instant it stopped.
To stop cooking, press the ON-OFF button.
The appliance stays on for a few seconds. Firstly, the ventilation switches off and emits an acoustic signal;
if the ON-OFF key is pressed again before the fryer switches off completely, the cooking cycle starts again
where it stopped.
- Once the time is up, ventilation remains active for a few seconds, after which the timer emits an acoustic signal
and the appliance switches off; remove the container and check cooking is complete; on the contrary, place the
container back in and set more minutes
- Pay attention not to touch the saucepan, the basket and the inner appliance.
- Pour the content of the basket in the container you want (plate, etc.).
The fryer can be re-used immediately without waiting for it to cool.
INSTRUCTIONS FOR USE
TYPES OF FOOD
ALL
MAXIMUM
TEMPERATURE
200°C
MAXIMUM TIME OF
60 min
11