Makita DCL181F Manual De Instrucciones página 10

Fig.19
3.
Connect capsule. Align O mark on capsule with O
mark on handle and then firmly twist capsule in direction
of arrow until it is secured.
Fig.20
► 1 . O Mark
Fig.21
► 1 . Handle 2. Capsule
NOTE: Always remove dust ahead of time, as suction
power will be reduced if there is too much dust in
cleaner.
NOTE: Always be sure to check that both filter and
prefilter are loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into the
motor housing, and cause motor failure.
If the following examples occur, filter and prefilter are
not loaded correctly. Reload them correctly to rectify
problem.
1
1
2
Problem Examples
Example 1: Only prefilter has been loaded (no filter)
Fig.22
► 1 . Prefilter
Example 2: Only filter has been loaded (no prefilter)
Fig.23
► 1 . Filter
Example 3: Filter has been loaded in a peeled back
state
Fig.24
► 1 . Filter
10 ENGLISH
1
1
1