JUMO meroTRON 104 Manual Breve página 73

Measuring probe
Voltage 0 to 10 V
Voltage 0 to 1 V
Heater current
++ = is detected
a
Break in measuring current path is not detected.
b
Is dependent on the set characteristic line.
5.2 Digital inputs
Input for potential-free contact
Function
Sampling rate
Counting input
Voltage
Counting frequency
5.3 Analog output
Voltage
Output signal
Load resistance
Current
Output signal
Load resistance
Accuracy
Ambient temperature influence
Underrange Overrange
++ ++
--- ++
--- ++
--- = is not detected
Contact closed: input is active (R
Contact open: input is inactive (R
Min. 50 ms (configurable)
0/24 V (logic level 0: < 3.5 V; logic level 1: > 10 V)
Max. 12.5 kHz, min. 0.5 Hz
DC 0 to 10 V
> 500 Ω
DC 0(4) to 20 mA
< 450 Ω
≤ 0.5 %
≤ 150 ppm/K
5 Technical data
Short-circuit Break (probe/
(probe/line) line)
--- ---
--- ---
--- ---
(+) = is detected in certain con-
ditions
< 1 kΩ)
ON
> 50 kΩ)
OFF
Reverse po-
larity
++
++
---
31