cecotec CONGA 8290 IMMORTAL ULTRA POWER HOME X-TREME Manual De Instrucciones página 59

Power Level function
Select the power level on the app to control the robot vacuum cleaner's suction power during
cleaning. There are four levels of suction power: Off, Eco, Normal, and Turbo.
Cleaning schedule
- To make cleaning easier, the robot vacuum cleaner has a function that allows it to be
programmed daily from the app. According to the setting, the robot vacuum cleaner will
automatically start cleaning in the selected days at the desired time.
- Before setting the time and the options on the robot vacuum cleaner, make sure it is on.
Quick cleaning modes
In addition, the robot vacuum cleaner already has pre-selected quick cleaning modes in
which you can define the cleaning area and settings and save your selection. In this way,
by simply selecting the quick cleaning mode you wish to use, the robot vacuum cleaner will
automatically clean as defined in that mode.
Other Functions
Do not Disturb function
A Do Not Disturb time slot can be selected to control the operation of the robot vacuum
cleaner, and it can be modified or cancelled from the app. During the set time, the robot
vacuum cleaner will disable the automatic, continuous cleaning and timer functions.
Map Editing function
- This function allows you to edit generated maps: rename cleaning areas, split or combine
areas, and edit cleaning mode, suction power, and scrubbing level in each selected area.
- You can also restrict areas by marking out specific areas on the map that you do not want the
robot vacuum cleaner to clean. You can select more than one restricted area on the map.
Robot vacuum cleaner's Location function
Allows to locate the robot vacuum cleaner on the map.
4. CLEANING AND MAINTENANCE
Cleaning the main brush
The main brush rotates at high speed and helps pushing the dirt into the suction mouth.
-
This brush is in contact with the floor, and therefore with dirt, so it can wear out overtime,
negatively affecting cleaning efficiency. For this reason, it is suggested to replace the
main brush after a maximum of 320 hours or less.
Slightly press the main brush frame's tabs to open the main brush compartment and
-
remove it. Fig. 11
CONGA 8290 IMMORTAL ULTRA POWER HOME X-TREME
ENGLISH
59