HAPIMP SV-TCQ Guia Del Usuario página 22

screen will countdown for 5 seconds, and the right LED indicator
indicator will also light up till the countdown ends.
3.2. How to play the recorded videos and photos?
You can play the recorded files through the camera screen directly or
connect the camera to the PC by the micro USB cable, or remove the
memory card and use a card reader to read it on the PC.
3.2.1. Play the recorded files through the camera screen
Slide the switch to TEST position, press the PLAY button, press
button▲ or ▼ to select the files, press button OK to play or pause the
video.
Notice:
This camera can record sound when you turn on the audio recording,
but it is not equipped with the speaker, so you can not hear sound while
you are playing the video from the camera itself. If you would like to
watch the video with sound, you need to play it from the PC.
3.2.2. Connect the camera to a PC by the micro USB Cable
1）Connect the camera(the memory card must be inside) to the
computer via the included micro USB cable. The camera screen will
display a "MSDC".
2）Open [My Computer] or [Windows Explorer]. A"U Disk" will
Basic Operation
18