HAPIMP SV-TCQ Guia Del Usuario página 8

Introduction
protective film on the lens and on the sensor of the product.
■ Ensure that the motion sensor is not dirty or damaged , if there is any
scratch or damage, it will affect the normal triggering of the camera.
■ Field installation: please make sure that the buckle of the camera and
the bottom DC plug are all closed and sealed, otherwise the camera
could be damaged in the rain.
■ The included micro USB cable is only used to transfer files from the
camera to the PC, please do not use it to charge the camera or the
rechargeable battery, it will seriously damage the camera.
■ Please keep the camera lens and infrared sensing windows clean. If
dirty, clean with a soft glasses cloth.
■ Do not scratch the LCD display screen, camera lens, infrared sensing
windows and IR led glasses with any sharp objects.
■When it is at low battery level, please replace all the batteries on time
to avoid leakage of the electrolyte that could damage the camera.
■Please read more notices from the next chapters.
If you want to know more information, please go to our website
www.hapimpofficial.com
to view or directly scan the QR code to get
more information.
4