HAPIMP SV-TCQ Guia Del Usuario página 29

Setup Menu and Functions
Password protection
Select "On" if you want to use a password to protect the camera from
unwanted access. You can set a 4-digit combination. Once the code is
set, the camera will prompt you to enter the correct code.If you forget
your password, please contact our official email to get the file to reset
the camera.
Official email: supportus@hapimp.net
Format memory card
Delete (erase) all files stored on a card to prepare it for reuse. Always
format a card that has been previously used in other devices.
Caution!Make sure you have downloaded and backed up any files
you want to preserve first! Press OK to execute, press MENU to exit
without formatting.
Serial NO.
Select "On" if you want to use a serial number to rank the camera. You
can set a 4-digit combination. This helps multicamera users identify the
location when reviewing the photos, since each camera will imprint its
number on all photos it captures.
Reset settings
Select 'Yes' and press OK to restore all parameters to the original
factory default settings.
Version
View the camera's firmware information.
25