Publicidad
Idiomas disponibles
Idiomas disponibles
registration, etc.).
Customers are responsible for internet
communication costs.
Registration on App
Please follow the airCloud Go App guidance to
complete the registration on the App.
Air Conditioner
Registration and Router
Connection
To proceed, you must be logged into your airCloud
Go App.
Make sure that the air conditioner is ready to be
powered on, then follow in-app guidance to add
the air conditioner. For step-by-step guidance, you
can scan the following code with your smartphone.
Initialization of the Built-in
airCloud Go Module
Reset the internal settings (restore the factory
settings) by remote controller. Please note that the
configuration will be cleared and pairing procedure
will be required to do again to use the built-in
airCloud Go module.
(1) Press Mode key and ON Timer key
simultaneously, pointing the remote controller
towards the air conditioning unit.
(2) Make sure Wi-Fi LED on Indoor unit flashes 4
times repeatedly for about 20 seconds (LED is
turning off between 2 sequences of 20 seconds).
(3) Restart the unit (turn power OFF during
1 minute, then turn power ON again) and check
that the Wi-Fi LED is blinking 3 times. If Wi-Fi
LED is indeed flashing 3 times, pairing mode
is well activated and factory settings have well
been restored.
Status Indicator (LED Indicator
may light up while the air
conditioner is turned off)
Wi-Fi Lamp
• Pairing time out occurs (after 10 mins.)&
configured router not detected.
LED OFF
• Air conditioner is not plugged in.
• Built-in airCloud Go module and the air
conditioner is not connected.
• The connection between the Built-in
airCloud Go module and the router is
completed.
LED ON
• The operation can be conducted through
smartphone.
LED flashes
Waiting to connect to the Wi-Fi router
3 times
using AP mode.
LED flashes
Restoring factory setting procedure has
4 times
started.
Communication error between air
LED flashes
conditioner & Built-in airCloud Go module
5 times
(Error detection time: approx 24 mins.)
LED flashes
with 4sec
Router connection error.
ON/1sec OFF
LED flashes
Cloud connection error. (Error detection
with 4sec
time: approx 30 mins.)
ON/3sec OFF
-8-
Corresponding Status
Publicidad
