Publicidad
Idiomas disponibles
Idiomas disponibles
Enclosure Installation
2
Remove the corner protectors. Save all packing materials (including
the pallet) for later use unless you are certain they will not be
required. The packing materials are recyclable.
3
Remove the heavy plastic bag surrounding the enclosure. Examine
the enclosure for any damage or loose parts. Confirm that all parts
are present. If anything is missing or damaged, contact Tripp Lite
for assistance. Do not attempt to use the enclosure if it has been
damaged.
4
Locate the 2 shipping brackets that attach the enclosure to the
shipping pallet. Use a 13 mm open-end wrench to remove the
shipping brackets. Be extremely careful, as the enclosure could shift
unexpectedly after bracket removal. Save the brackets and bracket
hardware for later use.
5
Move the enclosure close to its installation location inside its
shipping container before it is unpacked (use a forklift or pallet
jack to move the shipping container). Position the supplied unload
ramps to the pallet in line with the rack casters. Then with at least
one person on each side of the enclosure, slowly roll the rack off of
the pallets and down the ramps. Move the pallet and ramps out of
the way and position the unit into its final location. WARNING: Use
at least one assistant when removing the enclosure from the
pallet. Be extremely careful when moving the enclosure.
2
3
4
5
6
Publicidad
