cecotec Cumbia CREMMAET COMPACT Manual De Instrucciones página 24

ENGLISH
Num Problem Num Possible cause
1 The control 1.1 Water tank is out of
panel display water.
shows
the water
tank icon.
The display 2.1 The water tank is not
2 shows correctly installed.
"continuous
2.2 No pasa agua por la
square line",
bomba.
press the
2.3 The internal piping is
Settings/Exit
blocked.
button but
the coffee
machine
does not
dispense
water.
The control 3.1 The water flow meter
panel shows cables are loose or the
3 "continuous water flow meter is
square line" broken.
press the
Settings/
Exit button
but the icon
does not
disappear
when
dispensing
water.
46 CREMMAET COMPACT
Solution
Fill the water tank and install it in
the appliance.
Install the tank securely inside
the coffee machine.
Contact the official Cecotec
Technical Support Service.
Contact the official Cecotec
Technical Support Service.
Contact the official Cecotec
Technical Support Service.
4,1 Grinding too fine.
4.2 After filling the container
4 Watery/light
with dark roasted or oily
coffee.
coffee beans, the grinder
blades are sticky and the
coffee is not ground.
4.3 Residues and wet coffee
beans block the grinder.
5 No coffee 5.1 The water tank is not
comes out. correctly installed.
5.2 Filter blocked.
5.3 The internal piping of
the coffee machine is
blocked.
5.4 The processing unit does
not react, does not go
down/up and does not
react to commands.
ENGLISH
Turn the grind level knob to
obtain a coarser ground coffee.
Increase the grinding level or
contact Technical Support.
Remove damp coffee beans,
clean the container
and insert dry coffee beans/
grinder cleaner.
Install the tank securely inside
the coffee machine.
Clean or replace the filter.
Descale the coffee machine If
this does not solve the problem,
contact the official Technical
Support Service of Cecotec.
Open the right-hand panel door
and press and hold the espresso
button for 3 seconds, the press
unit will return to its initial
position.
CREMMAET COMPACT 47