Publicidad
Idiomas disponibles
Idiomas disponibles
You can adjust the angle of the drawer:
Open the drawer as far as it will go and remove
1.
the bottle shelves.
Remove the cover cap on both sides.
2.
Installation and connection en-us
Loosen the upper and lower screw on both sides.
3.
Do not remove the screws.
Note:
Move the drawer on the lower screw to the left or
4.
right into the required position and tighten the
screw.
Tighten all screws again and put the cover cap
5.
back on.
To check the position, close the drawer and
6.
correct if necessary.
11
Publicidad
