-
Never insert fingers or metal objects into the vents and openings of the heater.
-
Never cover the heater. Do not use this heater to dry or heat clothes.
-
Do not cover the power cord. Arrange the cord where it will not be a trip hazard.
-
To avoid a circuit overload when using this heater, do not operate another
high-wattage heater on the same electrical circuit.
-
This heater is filled with a precise quantity of special oil. Repairs requiring opening
of the oil container are only to be made by the manufacturer or his service agent
who should be contacted if there is an oil leak.
-
The heater should not be used in a room, of which the floor area is less than 5 M.
-
Use this heater only as described in this manual. Any other use not recommended
by the manufacturer may cause fire, electric shock, or injury to persons.
-
Allow the heater to completely cool before handling or cleaning it.
-
Ensure the heater is in the "O" OFF position and the Power Cord is unplugged
from the electrical outlet before cleaning the heater.
-
Do not allow water or other liquids to run into the interior of the heater, as this
could create a fire and/or electrical hazard.
-
Do not use any abrasive cleaners or solvents, as heater damage will occur.
PARTS
Front Carry Handle
1
Rear Carry Handle
2
Thermostat Dial
3
Power Switch Dial
4
24 Hour Timer
5
Radiator Fins
6
Cord Storage
7
Castor Wheels
8
1
3
4
5
7
2
2
6
8
English | 2