Publicidad
Idiomas disponibles
Idiomas disponibles
ATTACHING
ACCESSORIES
EXTENSION WAND SECTIONS
•
Align Extension
Wand
(A) with
hose handle
(B) (5._,). Connect
the wand with the rotating
cord hook first to the hose and handle assembly.
•
Press Extension
Wand
with the rotating cord
hook against the hose handle until you hear
a click.
•
Repeat this p_ocedure if it is necessary to attach
more wands. The fixed hook extension wand will
be last to be attached (closest to the accessory
or mop head).
•
Use ExtensionWands
to increase the distance
from
HoselHandle
Assembly to the chosen
accessory
(mop head,
grout tool, etc.)
ATTACHING
MOP
HEAD
•
5.2 Align Extension Wand (C) with the opening on the Mop Head (D), at the
corresponding end,
•
Press Extension 'Wand against the Mop Head until you hear a click.
=' Use Mop Head to clean sealed
hard floors
and carpets.
Pad must be
attached.
Reference
section "Attaching
the Microflber
Pads" to ensure
correct pad is being used.
I
Mop head can also be connected
directly to the hoselhandle
assembly.
ATTACHING THE MICROFIBER PADS
For GeneralCleaning
ii
Use the "Multi-Surface
Microfiber Pad" (5.3).
II
Place the "Multi-Surface
Microfiber
Pad" on
the floor (white side up).
i
Place the product
on top of the pad making
sure the
mop head
covers
the entire
pad
(5.3). Hook and loop feature
on the bottom
of the mop head will hold the pad in place.
ForDisinfecting
•
To disinfect
and
kill or remove
99.9%
of
harmful bacteria, use the "Hard Floor Microfiber
Pad", which contains the cut outs in it (5.4).
•
Place
the
"Hard
Floor
Microflber
Pad"
on
the floor (white side up).
•
Follow directions
For General Cleaning.
•
Fill the solution
tank with the HooveP
Multi-
Purpose Disinfectant
as directed in "Removing
and Filling Solution Tank" section on page 7. Turn
Clean Control dial to HIGH,
•
Run a minimum of 4 strokes at a medium pace
across same area and allow to air dry.
Publicidad
