Troy-Bilt E189 Manual Del Operador página 9

Assembly & Set-Up
Contents of Carton
• One Lawn Mower
• One Lawn Mower Operator's Manual
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up gasoline and oil as instructed in the accompanying engine
manual BEFORE operating your mower.
Handle
1. Remove any packing material which may be between
upper and lower handles.
a. Carefully pull up and back on upper handle as
shown in Fig. 3-1. Do not crimp cable while lifting
the handle up and be careful to not catch battery
box on engine shroud.
b. Tighten star knobs securing upper handle to lower
handle. See Fig. 3-1. Make sure that each carriage
bolt is seated properly in the handle.
B
Figure 3-1
2. Tighten star knobs securing lower handle to handle
brackets. See Fig. 3-2. Make certain the lower handle is
seated securely into the handle mounting brackets.
• One Grass Catcher
• One Side Discharge Chute
A
B
• One Bottle of Oil
• One Engine Manual
Figure 3-2
3. The rope guide is attached to the right side of the upper
handle. Loosen the wing nut which secures it to the upper
handle. Refer to Fig. 3-3.
C
D
Figure 3-3
3
A
B
9