Dismantling the unit
• Pull the power plug and remove all connections.
• Dismantle the unit as shown in the figure.
• After cleaning or maintenance, reassemble the unit in reverse order.
• During reassembly, ensure that
– the clamp fastening the pump in the holder is securely engaged.
– the connection lines are guided out of the housing with the cable sleeve and that they are
not kinked or crushed.
Cleaning the device
Clean the unit as required but at least twiceper year.
− When cleaning the pump, pay particular attention to the impeller unit and the pump
housing.
• Recommended cleaning agent for removing stubborn limescale deposits:
– Pump cleaning agent PumpClean from OASE.
– Vinegar- and chlorine-free household cleaning agent.
• After cleaning, thoroughly rinse all parts in clean water.
38
AMX0187