Rexton BTE Serie Manual De Instrucciones página 9

ENGLISH
FREE FIT INSTRUMENTS TYPE PLATE
To remove the original plate insert a pick-type tool in between the battery
door and the type plate and lift the bottom of the type plate from the
housing. Insert the appropriate red or blue indicator in the top slots and
push down to lock the bottom of the plate in place.
#
R
E X T O N
Type Plate Tube Size Indicator
TUBE SIZE INDICATOR
The tube size is located on the lower portion of the tubing near the dome.
Sizes range from 1-6. The right tubes are marked with a red number. The
left tubes are marked with a blue number.
ATTACHMENT PROCEDURE FOR
FREE AND OPEN DOME
Grasp the rounded end of the dome
between your thumb and forefi nger and
slide it over the Open tip Adapter until it
"fl ared portion"
reaches the "fl ared portion" of the tube.
Push on the tip of the dome to make sure it
is snug against the tube tip.
Tube
Dome
REPLACEMENT PROCEDURE
Grasp the rounded end of the dome
between your thumb and forefi nger and pull
it off the Open Tip Adapter. Use an alcohol
wipe to remove any wax and debris from
the tube and adapter. Use the blue cleaning
tool to clean the inside of the tube of any
moisture or debris. Reattach a new dome as
outlined above.
9