Technical Data - Metz MECABLITZ 50 AF-1 digital Manual De Instrucciones

16 Technical data

Max. guide numbers at ISO 100/21°, zoom 105 mm:
In the metric system: 50 In the imperial system: 165
Flash modes:
Standard TTL with measuring preflash, Matrix-controlled TTL fill-in flash mode,
3D multi-sensor fill-in flash mode, Automatic FP short sync., D-TTL, D-TTL-3D,
i-TTL, i-TTL-BL, Manuel M
Manual partial light output levels:
1/1 ... P1/128 light output, in one-third increments.
P1/1 . . . P1/32 light output, in automatic high-speed synchronisation (HSS)
Flash durations see table 4, page 176:
Sensor measuring angle: approx. 25°
Colour temperature:
approx. 5600 K
Film speed:
ISO 6 to ISO 6400
Synchronisation:
low-voltage ignition
Number of flashes:
• approx. 210 with high-capacity alkaline manganese batteries
• approx. 330 with NiMH batteries (2100 mAh)
• approx. 460 with lithium batteries
Recycling time (at full light output): Approx. 3,5 sec
114
Light coverage:
Main reflector from 24 mm (35 mm format)
Main reflector with wide-angle diffuser from 12 mm (35 mm format)
Swivelling ranges and locking positions of the reflector
upwards -7° 45° 60° 75° 90°
counter-clockwise
clockwise 30° 60° 90° 120°
Dimensions, approx., in mm (W x H x D):
71 x 137 x 99
Weight :
Flash unit with batteries approx. 452 g
Included:
Flash unit with integrated wide-angle diffuser, operating instructions
(at full light output)
30° 60° 90° 120° 150° 180°