Getting Started; Loading A Memory Card - Coby Snapp HD CAM4505 Manual De Instrucciones

Â

Getting Started

In this section, you will:
 Learn how to choose and load a memory
card.
 Learn how to install and charge the battery.

Loading a Memory Card

The camcorder records to SD, SDHC, or MMC
memory cards (maximum 32 GB).
Load a memory card by insert-
ing it into the memory card slot
on the top of the camcorder
(remove the protective cover to
access the slot). Make sure to
load the card in the direction
indicated by the marking on the
camcorder. Press the memory
card into the slot until it clicks
into place.
Getting Started
 Learn how to turn the camcorder on.
 Learn how to change between movie,
photo, and review modes.
To remove the memory card, press it further into
the slot and then release. The card will spring
out of the slot.
To avoid data corruption, turn off the
camcorder before loading or removing
a memory card. Do not attempt to place
any object other than a compatible
memory card into the memory card slot.
Compatible cards should slide easily
into the memory card slot; if you en-
counter resistance, do not attempt to
force the card in.
Avoid touching the metal contacts of
the memory card.
Page 11