Descargar Imprimir esta página

KlipXtreme ZoundBuds Manual Del Usuario página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Charging case LED indicator: displays the
load level of the built-in battery.
2. Magnetic charging socket: place each
earbud in the corresponding left and right
side of the portable case for recharging.
3. Removable silicone tips: provide a
comfortable and secure fit.
4. HD microphone: picks up your voice for
hands-free calling and conferencing.
5. Multifunction touch button: press this
button to turn the earbuds on and off. In
addition, tap this button to start and pause
media, and to answer or end an incoming call.
6. Earbud LED indicator: displays the load
level of the built-in batteries.
7. Charging port: insert the USB Type-C-USB
cable in this jack to charge the battery.
8. Battery button: press it to check the load
level of the case built-in battery.
Earbud multifunction button
Mode
Function
One-step pairing
The left and right earbuds are set to instantly
connect as soon as they are removed from
the charging case
Power on
If the earbuds do not enter into the pairing
mode automatically when taking them out of
the charging case, press and hold the
Multifunction button for about 7 seconds
Power off
Put the earbuds back to the charging chase
to automatically turn them off
When the earbuds are not in the charging
case, press and hold this button for 7 seconds
to power them down
When removed and not paired with a
Bluetooth
shut off after 3 minutes of inactivity
Hands-free mode
Briefly press the right/left button once to
answer and end an incoming call
Press and hold the right/left button for about
2 seconds to reject or ignore an incoming call
Briefly press the right/left button to put the
current call on hold
Playback mode
Briefly press the right/left button once to play
and pause media
Quickly press the right/left button three times
to play the previous track
Quickly press the right/left button twice to
play the next track
Voice recognition
From the playback or standby mode, press
feature
and hold the right/left button for about 2
seconds to enable the voice assistant in
supported devices
device, the earbuds will completely
®

Publicidad

loading

Este manual también es adecuado para:

Kte-250