LED indicators on the charging
case and earbuds
Status
Function
Charging
Earbuds:
The LED slowly blinks orange while charging
When fully charged, the LED turns off
Charging case:
The LED slowly blinks white while charging
When fully charged, the LED lights up solid
white
Power on
The charging case indicator LED glows solid
white for 8 seconds
Power off
The charging case indicator LED blinks white
three times
Power level
100% charge with cable: the LED glows
display
solid white
100% - 20% charge: the LED glows solid
orange
20% charge: the LED blinks slowly orange
3. Basic operation
3.1 Charging the case and earphones
Note: The case and earbuds have internal, non-removable,
rechargeable batteries. Do not attempt to remove the battery
as you may damage the device.
1. To charge the case, plug the supplied USB cable
into a power source and the Type-C USB port on
the case. Likewise, you can also place the device
on a wireless charging pad which is user-supplied.
The case starts charging automatically using either
method.
Note: Charging the case on a wireless charging
pad will depend on the user's kind of charging pad
and on where the case is placed on the wireless
charging pad. In certain cases, the case will not
necessarily be charged by placing it in the center of
the wireless charging pad, but rather by placing it in
some other position on the wireless charging pad.
2. Charging the case battery to its full capacity may
take approximately 3.5 hours.
3. When the battery is fully charged, the LED
indicator light will become solid white.
4. Proceed to unplug the case from the power
source and place the earphones on the sockets of
the charging case.
5. While the earbuds are being charged, the white
LED indicator on each side lights up. The LED will
turn off when their batteries reach full capacity.
This process will normally take about 1.5 hours.
6. The fully charged earbuds have power for up to 7
hours of playtime or up to 200 hours of
standby time. However, these times may vary