Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 Music playback and voice command
using your wireless earbuds
• Briefly press the Multifunction button on
either one of the earbuds to start and stop
audio playback.
• Double tap the Multifunction button on the
right/left earbud to select the next the track
• Triple tap the Multifunction button on the
right/left earbud to select the previous the track.
• To enable the voice command feature on
supported devices, press and hold either
earbud button for about 2 seconds when in
playback or standby mode.
5. Proper care
5.1 Troubleshooting
If you cannot connect the earbuds to your mobile
phone, do as follows:
• Ensure that the earbuds are charged, switched
on, paired with and connected to your phone.
• Ensure that the Bluetooth
on your phone.
• Check that the device is within 30 feet of your
phone and that there are no obstructions
feature is activated
®
between the headset and the phone, such as
walls or other electronic devices.
5.2 Precautions
• Your earphones are powered by rechargeable
batteries. The battery can be charged and
discharged hundreds of times, but it will
eventually wear out. Recharge your battery only
with compatible chargers designated for this
device.
• Unplug the USB charger from the source when
not in use.
• Parts of the device are magnetic. Metallic
materials may be attracted to the headset. Do
not place credit cards or other magnetic storage
media near the earphones, as the information
stored on them may be erased.
• Do NOT drop, hit or shake the device.
• Do NOT disassemble, repair or modify the
earphones yourself.
• Do NOT use harsh chemicals, cleaning solvents,
or strong detergents to clean the device.
• Do NOT expose the earphones to excessive
heat or to direct sunlight for long periods of
time.
• Do NOT store the device in a place with high
humidity or dust.
Publicidad
